Bird B Gone 1.5" Anchor Rivet hero view, BN15R

Anchor Rivets

Overview

Anchor Rivets are commonly used to anchor Stainless Steel Bird Wire Posts for Bird Wire Installations or as intermediate anchors when securing Split Pins as part of a Bird Net installation.

  • Low-profile intermediate attachment for perimeter wire runs for bird netting
  • Anchors as Bird Wire Stainless Steel Post installations
  • Ideal for stone, masonry, or brick surfaces
  • Choose from two lengths: 1” or 1.5”
  • Requires a 6.5mm pilot drill bit for installation
  • Supplied in convenient 100-pack

* Required Fields

SKU:
BNR

Total:
$19.87

Anchor Rivets provide an exceptionally secure hold when fastening hardware into concrete, stone, masonry, or wood surfaces. When drilling is permitted, these mechanical anchors create a rock-solid foundation for your layout.

To install, drill holes using a 6.5mm drill bit, insert the nylon anchor rivets into each hole, and hammer your Stainless Steel Posts or Split Pin hardware directly into the anchor rivets approximately 1” for a firm friction fit.

Key Features and Benefits:

  • Delivers a permanent, low-profile anchor point in hard substrates
  • Ideal for concrete, stone, brick, and wood surfaces
  • Available in two versatile lengths: 1” and 1.5”
  • Recommended drill bit size: 6.5mm
  • Supplied in 100-packs for larger jobs

Installation Instructions

Always drill pilot holes with a 6.5mm drill bit, insert the anchor rivet, and hammer your post down approximately 1” into the rivet to lock it in place.

Commercial Pricing Available: 800-392-6915