Transparent Bird Gel
Overview
Sticky Bird Repellent Gel
Transparent Bird Gel is a sticky repellent used to prevent birds from landing on horizontal surfaces. This bird repellent gel stops birds from perching on ledges, I-beams, parapet walls, signs, conduits, pipes, and more. This product should not be used around protected bird species.
- Designed for Pigeons & Starlings
- Applies easily with a caulking gun
- One tube covers approximately 10-ft
- Lasts up to 6 months outdoors!
Transparent Bird Gel is a sticky repellent used to prevent birds from landing on horizontal surfaces. Bird Gel is applied to areas where birds are landing; birds will not like the sticky sensation on their feet and will move on to a more comfortable spot. Transparent bird gel can be used on indoor or outdoor surfaces where birds are landing and lasts up to 6 months. Transparent Bird Gel should never be used on a vertical surface. Transparent Bird Gel is effective for Pigeons, Starlings and larger birds. This product should not be used around protected bird species. Recommended for use on ledges, I-beams, parapet walls, signs, conduits, pipes, and more. One tube covers 10’.
Transparent Bird Gel Features and Benefits
- Creates a sticky surface that birds avoid
- Humane - not harmful to birds and people
- Designed for Pigeons and Starlings; not for use where other bird species are present
- Economical & effective
- Applies easily with a caulking gun
- Effective at wide temperature extremes: 15 deg. F to 200 deg. F.
- Virtually Invisible
- Super fast & easy to install
- One tube covers 10' (120'/case)
- Lasts up to 6 months outdoors!
Surface Preparation
- Safety First: Always wear personal protective equipment (PPE) such as waterproof gloves and eye protection.
- Clear Debris: Wipe or scrape away all dust, dirt, droppings, and loose debris from the application surface.
- Clean and Disinfect: Thoroughly clean and disinfect the surface using a hospital-grade disinfectant, then allow it to fully dry.
- Seal Porous Surfaces: If applying to porous surfaces (like unpainted wood or concrete), seal them first by brushing on one coat of shellac or a 50% solution of white glue, and let dry.
Application Instructions
- Tooling: Use a standard caulking gun and/or a putty knife.
- Prep the Tube: Remove the cap and carefully cut off the tip of the plastic nozzle on top of the tube. Puncture the internal seal using a screwdriver or the extension rod on your caulking gun.
- Ensure Adhesion: Press the nozzle tip firmly against the surface during application to guarantee strong initial adhesion.
- Application Pattern (Ledges & Sills):
- Apply beads of repellent no larger than 1/2" wide by 1/2" deep at the deepest part.
- Place strips no closer than 2" apart, beginning 1" in from the outer edge.
- Apply in a 3” zig-zag pattern, leaving periodic gaps/spaces for water drainage.
- Application Pattern (Roofs & Peaks): Apply a single bead of repellent along the highest point.
- Coverage: One standard 10 oz. tube treats approximately 10 linear feet when applied in the recommended 1/2" x 1/2" bead dimensions.
Important Guidelines & Restrictions
- Where to Use: Horizontal surfaces including ledges, parapet walls, windowsills, pipes, I-beams, conduits, and flat or curved horizontal perches.
- DO NOT apply on vertical surfaces.
- DO NOT apply in areas where birds are currently nesting.
- DO NOT apply where small or legally protected species of birds might become entangled.
Clean-Up & Removal
- Equipment & Surfaces: Use mineral spirits to remove product residue from treated surfaces, application tools, or contaminated articles.
Commercial Pricing Available: 800-392-6915
Complete Installation Instructions
Download Installation Instructions (PDF)
Product Literature
Download Product Literature (PDF)
Safety Data Sheet
Download Safety Data Sheet (PDF)
Product Label
Download Product Label (PDF)
Get Free Advice
Our Bird Control Experts will help you choose the right product or
find a professional bird control product installer in your area!